| 型號 | Model | ZX-260 | |||
| 射膠系統 | Injection unit | 單位 Unit | A | B | C |
| 射膠系統 Injection unit | |||||
| 螺桿直徑 | Screw diameter | mm | 50 | 55 | 60 |
| 螺桿長徑L/D | Screw L/D ratio | - | 22 | 20 | 18.3 |
| 理論射膠容積 | Theoretical shot volume | cm2 | 540 | 653 | 778 |
| 射膠重量(PS) | Shot weight (PS) | g | 497 | 601 | 715 |
| 射膠重量(PS) | Shot weight (PS) | oz | 17.6 | 21.2 | 25.3 |
| 螺桿行程 | Screw stroke | mm | 275 | ||
| 射膠壓力 | Injection pressure | Mpa | 204 | 169 | 142 |
| 理論射膠速率 | Injection rate | g/s | 165 | 200 | 237 |
| 最大螺桿轉速 | Max. screw speed | rpm | 180 | ||
| 鎖模系統 Clamping Unit | |||||
| 鎖模力 | Clamping force | KN | 2600 | ||
| 移模行程 | Toggle stroke | mm | 550 | ||
| 拉桿間距 (H*V) | Space between tie bars | mm | 575*575 | ||
| 最小模厚 | Min.mold thickness | mm | 220 | ||
| 最大模厚 | Max.mold thickness | mm | 580 | ||
| 頂出行程 | Hydraulic ejection stroke | mm | 170 | ||
| 頂出力 | Hydraulic ejection force | KN | 71 | ||
| 其他 Others | |||||
| 油壓系統壓力 | Hydraulic system pressure | Mpa | 17.5 | ||
| 油泵馬達功率 | Pump motor | kw | 22/29.9 | ||
| 電熱量 | Heating capacity | kw | 14.6 | ||
| 郵箱容量 | Oil tank capacity | L | 380 | ||
| 外形尺寸 | Machine dimensions | m | 6*1.4*2.2 | ||
| 理論機重 | Machine weight | Tom | 7.9 | ||
- CN